Miele PW 6241 Operating And Installation Instructions page 32

Frequently asked questions
Water intake fault
M
Call Technical Service
if restart w/o success.
i
^ Check the water supply and press "Start".
Door lock fault
/
Contact Technical Service
if restart w/o success.
i
^ Press the door handle so that it closes with a click,
press "Start".
Heating system fault
§
Program stop.
Press Start.
i
^ Press "Start" to continue the program without hea-
ting.
If the program has a "Thermostop" the program will
time out.
^ Call Miele Technical Service.
^ Some programs may be canceled if this messages
shows.
Call Technical Service.
32
m
f i
^ Allow the motor to cool.
§
f i
Large imbalance, the imbalance switch has
activated.
^ Turn the machine off and on again
^ Press "Start".
q
f
i
^ Check and clean the drain system and press h
"Start".
A defective drain valve should only be replaced by
an authorized service technician.
ö
i
^ Change/fill the dispensing container.
§
i
^ Insert the card properly into the card reader.
Drive motor fault
Program stop. Press Start.
Motor temperature too high.
Imbalance fault
Call Technical Service
if restart w/o success.
Drain valve fault
Call Technical Service
if restart is w/o success.
Dispensing system fault
Fill dispensing container 1
Press Start.
Card fault
Reinsert card correctly in card reader.
f
A
f
f
f