Skipping Program Cycles; Program Stop; Program End With Water In The Drum - Miele PW 6241 Operating And Installation Instructions

Use

Skipping program cycles

Cycles of a program in progress can be skipped or
repeated.
^ Press the f "End" button to stop the program.
1 Hot Wash

Program stop

i ü
^ Press the ü "Skip/Repeat" button. The display
shows the current area, block or step.
See also "Program structure" in the Programming
Manual.
Skip/Repeat -> 1 Hot Wash
Program stop
Area 2: Main wash
Area 2: Main wash
Block 1: Main wash
Step Wash time 2
^ Turn the jog shuttle to "Area" and press it to confirm
the selection.
Area: Select either 1 Prewash, 2 Main wash or 3
Rinse and confirm by pressing the jog shuttle.
^ Turn the jog shuttle to "Block" and press it to con-
firm the selection.
Block: Select either Prewash 1-10, Main wash 1-10
or Rinse 1-10 and confirm by pressing the jog
shuttle.
^ Turn the jog shuttle to "Block" and press it to con-
firm the selection. Select the desired program step
and confirm.
^ To start the new program step press S "Save" and
"Start".
To go back without skipping a program cycle
^ Press the A "Back" button to go back to the pro-
gram stop.
Program stop
^ To stop the program, press f "End".
The program stops.
1 Hot Wash
Program stop
i ü
^ Press f "End" again to continue the program.
18
f
e
S A
-
S A
f

Program end with water in the drum

If the program is interrupted during a cycle, the
display shows either:
1 Hot Wash
Program end - Water in the drum
m
or
1 Hot Wash
Program end - Drum rotates
m
,
The drum door is locked.
Do not use force!
^ Press the q "Drain" button or select the Drain Extra
program and press "Start".
^ At the end of the program open the door.
FC A
FC A