Hitachi CP-TW2503 User Manual page 88

Presentation tools
Interactive Function (continued)
USER SETTING
The Interactive Function can be set in IWB of the EASY MENU or IWB of the
ADVANCED MENU.
Item
While the image signal from the input port chosen in step (1) is
projected, select IWB MODE in step (2).
(1) Choose a picture input port using the ▲/▼ buttons.
(2) By using the ◄/► buttons, select STAND ALONE or WITH
PC mode.
STAND ALONE :
- You can draw additionally on the input image by internal paint
- You can operate the computer connected to the projector by
- When selecting USB TYPE A port, you can operate PC-LESS
IWB MODE WITH PC :
- You can operate the computer connected to the projector by
You can install U-Pointer to computer without bundled DVD
according to the dialog displayed on the computer when
connecting the projector and computer with a USB cable. (Refer
to Driver Installation for detail.) (100)
- You can use AUTO CALIBRATE function.
- You can use various functions by installing paint tool (i-Pro) to
- When using the optional part Finger Touch Unit (FT-01), be sure
OFF :
Select OFF when you don't use the IWB Function.
88
tool of the projector without using a computer.
Interactive Function.
In this case, you don't need to install special software in the
computer.
Presentation function of the projector by Interactive Function.
Interactive Function.
computer.
(Refer to the manual of i-Pro for detail.)
to use it after selecting WITH PC mode.
Description