Heater Removal; Drim Baffle Removal - Maytag ADE7005AK Service Service Manual

Disassembly Procedures
!

Heater Removal

1. Disconnect power supply to unit.
2. Remove Top Cover and Front Panel, see "Top Cover /
Door Switch / Front Panel / Gasket Removal"
procedure.
3. Remove Belt from Idler Pulley.
4. Remove Drum.
5. Remove two screws securing Heater Assembly to rear
bulkhead.
6. Disconnect wiring, drop Heater Assembly down and
rotate out to remove.
©2006 Maytag Services
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
Drum Baffle Removal
1. Disconnect power supply to unit.
2. Remove Top Cover, see "Top Cover / Door Switch /
Front Panel / Gasket Removal" procedure.
3. Remove two screws retaining Drum Baffle.
16026315 23