Heater Removal; Wiring Configuration - Maytag MDE2400AY Series Service Manual

Disassembly Procedures
!
3. Pull Vent Tube from the exhaust port on the blower
outlet duct.

Heater Removal

1. Disconnect power supply to unit.
2. Remove Back Cover.
3. Slip Heater Harness from wire tie on the dryer back.
©2004 Maytag Services
WARNING
16023432 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
4. Disconnect Heater Harness plug.
5. Remove 4 screws and Heater Assembly from dryer
back.

Wiring Configuration

Heater Heater
Harness Harness
Retaining Retaining
View of the rear of the dryer cabinet View of the rear of the dryer cabinet
with drum removed showing proper with drum removed showing proper
wire harness routing and location of wire harness routing and location of
retaining clips. retaining clips.
Main Main
Harness Harness
C C
lips lips
Motor Harness Motor Harness
15