Door Reversal/Disassembly Removal - Maytag ADE7005AK Service Service Manual

Disassembly Procedures
!
5. Remove two screws, 1 each side, from the back flange
of the Front Panel.
6. Tip Front Panel back and remove. Rotate Front Panel
to the back side and remove gasket.
18
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
Door Reversal / Disassembly
1. Disconnect power supply to unit.
2. Remove four screws on Door Hinge.
3. Remove hole covers opposite hinge side and install
them in the new location.
16026315
©2006 Maytag Services