JVC CX-7000 Series Electronic Manual page 70

Setup
Windows Vista
A [AutoPlay] screen appears.
.
Clicking [Run SETUP.exe] displays the [User Account Control]
screen.
Clicking [Allow] displays the card printer setup screen.
2
Select the [Printer Driver] checkbox on the card printer setup screen
A Select the language to use from the [Language] pull-down menu
Selecting [Japanese] switches the program to the Japanese
version.
Selecting [English] switches the program to the English version.
B Select [Ethernet connection] from [Interface].
C Select [Install] under [Action], and select the [Printer Driver]
checkbox
Memo:
You can select the [Status Monitor] and [Electronic Manual]
checkboxes to install them simultaneously. Selecting all checkboxes
starts installation in the order of the Electronic Manual, status
monitor, and printer driver.
The same status monitor can be used for printers connected via
USB and Ethernet.
Clicking [Open the Electronic Manual] opens the Electronic
Manual.
Clicking [Exit] ends the installation.
3
Click [Next]
A [Installation of CX-7000 Ethernet printer] screen appears.
.
4
Read through the "Software License Agreement"
If you accept the terms and conditions, select [I agree] to start
installation.
If you do not agree, click [Cancel] to stop the installation.
70
5
Click [Next]
A start installation screen appears.
.
6
Connect the printer and computer using a LAN cable
7
Turn on the power of the printer
8
Check the details, followed by clicking [Next]
A screen for setting [Printer model] and [Printer name] appears.
.
A Select a [Printer model]
B Enter the [Printer name]
C Select the [Make this the default printer.] checkbox if necessary
Memo:
Doing so enables you to set it as a default printer after installation
is complete.
9
Click [Next]
A screen for entering the shared name appears.
Enter the shared name when you are sharing a printer.
.
Memo:
You can also set the shared name after installation is complete.