Setting Alarm Recording - Sanyo DSR-3716P Instruction Manual

3 RECORD SET
Timer recording using an external timer
Use the following procedure to control the start and end of
recording in response to signals received via the EXT
TIMER ON terminal on the rear of the digital video
recorder.
Example:
Recording at a rate of 5 FPS using the EXT TIMER ON
terminal
1
Connect the signal line from the
external timer to the EXT TIMER ON
terminal within the rear panel control
terminal block.
External timer input (with a pulse
width of 1 second or more)
2
Turn the jog dial to select line 9 (EXT),
and then turn the shuttle dial clockwise.
"OFF" for "PROGRAM" flashes.
3
Turn the jog dial to set "PROGRAM" to
"OFF", and then turn the shuttle dial
clockwise.
"12.5" for "FPS" flashes.
EXT ***** *****
4
Turn the jog dial to set "FPS" to "5",
and then turn the shuttle dial clockwise.
"OFF" flashes.
EXT ***** *****
English
External timer signal
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
OFF 12.5FPS OFF
OFF 5FPS OFF
5
Turn the jog dial to change "OFF" to
"ON", and then turn the shuttle dial
clockwise.
The cursor moves to line 1.
EXT ***** *****
6
Press the [EXIT/OSD] button.
The setting is completed and turns to normal screen.
EXIT/OSD
7
Press the [TIMER] button.
TIMER
The [TIMER] button lights up and the recorder enters
timer recording standby mode.
"REC" will be displayed within the operation display
area while a signal is being received (with a pulse width
of 1 second or more) via the EXT TIMER ON terminal,
and monitoring video will be recorded in the normal
recording area.
External timer recording and normal timer recording can
be combined.
Connect the signal line from the external timer to the
external timer recording terminal. External timer
recording will not be possible until a timer is connected.

Setting alarm recording

To set alarm recording
Use the following procedure to select the recording picture
quality, audio recording, and recording rate for the alarm
recording area.
1
Press the [MENU] button and turn the
jog dial to select "2. RECORD SET", and
then turn the shuttle dial clockwise.
The <RECORD SET> screen is displayed.
MENU
77
OFF 5FPS ON