Record Set; Settings For Recording; Normal Recording Easy Setup - Sanyo DSR-3716P Instruction Manual

3

RECORD SET

Main Menu
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER LOSS/USED TIME ->
6.INITIALIZATION LOG ->
7.COPY MENU SETTINGS ->
MOVE:JOG SELECT:SHUTTLE

Settings for recording

The <RECORD SET> is used to make the following settings.
Setting
<NORMAL REC EASY SET>
<NORMAL REC EASY SET>
RECORDING DURATION BASE ->
1 Makes basic settings based
REC RATE BASE ->
on a number of days or a rate.
CAUTION !
CONNECT CAMERA AND SET TIME
BEFORE SETUP
<RECORDING AREA SET>
<RECORDING AREA SET>
Displays the total capacity of
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
the hard disk.
AREA FULL RESET ->
2
ALARM RECORDING AREA : 19 %
AREA FULL RESET -> Sets the normal recording
ARCHIVE AREA : 1 %
AREA FULL RESET ->
area, the alarm recording
CAUTION : WHEN THE AREA SETTING IS CHANGED,
area, and the archive area.
THE WHOLE AREA WILL BE INITIALIZED !
<RECORDING CONDITIONS SET>
Sets whether overwriting is to be
<RECORDING CONDITIONS SET>
performed (by deleting old video)
NORMAL RECORDING AREA
OVERWRITE : ON
or recording is to be stopped
ALARM RECORDING AREA
3
OVERWRITE : ON
when any of the hard disk's
REMAINING DISK WARNING : **
SERIES REC : OFF
recording areas become full.
AUTO DELETE : OFF
Also sets the auto delete and
series recording.
<NORMAL REC MODE SET>
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
Sets the picture quality, audio
REC RATE : 12.5FPS ( 42H)
4
REC PROGRAM GROUP : OFF
recording, the recording rate,
and the program period.
<PROGRAM REC SET>
<PROGRAM REC SET>
PROGRAM : P-1
5 SELECT INDIVIDUAL CAMERA RATE(FPS) Sets program recording for
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
cameras.
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
ALARM FULL indicator
FULL indicator
[CAMERA SELECT] buttons
<RECORD SET>
1.NORMAL REC EASY SET ->
2.RECORDING AREA SET ->
3.RECORDING CONDITIONS SET ->
4.NORMAL REC MODE SET ->
5.PROGRAM REC SET ->
6.TIMER SET ->
7.ALARM REC MODE SET ->
8.ALARM OPERATION SET ->
MOVE:JOG SELECT:SHUTTLE
Description Ref
P.60
P.64
P.67
P.71
P.73
[MENU] button
Setting
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
6
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
7
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
<ALARM OPERATION SET>
ALARM RETRIGGER : OFF
8
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : OFF

Normal recording easy setup

Use the following procedures to make simple recording
settings. Two different setting methods may be used -- one
based on recording days; the other based on recording rate.
Before making easy setup settings, connect the
camera(s) to the digital video recorder and then always
perform "CAMERA DETECT".
When easy setup settings and individual settings are both
set, the most recent settings override previous settings.
Easy setup settings will be cancelled as a result of the
following operations.
(1) When the number of cameras detected using "CAMERA
DETECT" is greater or less than the number of cameras
previously stored in the digital video recorder.
(2) When the setting for "PRE-ALARM RECORDING" from
the <ALARM REC MODE SET> screen is changed.
(3) When menu settings are loaded from a CompactFlash card.
(4) When a new easy setup setting operation is carried out.
(5) When setting values are changed for normal recording
or timer recording.
(6) When the area is changed using the <RECORDING
AREA SET> screen.
60
[EXIT/OSD] button
Shuttle dial
MENU
RESET
EJECT
Jog dial
[TIMER] button
Description
<TIMER SET>
Makes timer settings so that
operations can be started at a
specified time or on a
specified day.
<ALARM REC MODE SET>
Sets alarm recording, pre-
alarm recording, and motion
sensors.
<ALARM OPERATION SET>
Makes settings for operation
and display upon detecting an
alarm.
P.54)
(
CARD CARD
Ref
P.74
P.77
P.84
English