NEC Electra Elite 48/192 Features And Specifications Manual page 276

Electra Elite
Features and Specifications Manual
To transfer a call:
1. With a call in progress, press the transfer/TRF key, and wait for
internal dial tone.
2. Dial the desired station number.
3. Press the talk/TALK key to release the call.
To mute a call:
1. While a call is in progress, press the mute/MUTE key. This
causes the associated Line key to flash.
2. Pressing mute/MUTE again restores the voice path so that both
parties can communicate.
To place a conference call:
1. With a call in progress, press the conf/CNF key, and wait for
internal dial tone.
2. Place second call, and wait for the party to answer.
3. Press the conf/CNF key to establish the conference call.
To program Speed Dial (outside - D
1. Press the SPD key.
2. Enter the Trunk Access Code followed by the telephone number
(up to 16 digits).
3. Press the SPD key.
4. Enter the 2-digit buffer number (01~20). Wait for confirmation
tone. The outside Speed Dial is stored in memory.
term
Cordless only):
Issue 6
D - 67