How Do I; Place A Call; Put A Call On Hold; Adjust The Handset Volume - Cisco 7942 Quick Reference Manual

How Do I?

Place a Call?

Put a Call on Hold?

Adjust the Handset
Volume?
Adjust the Ringer
Solution
••Lift the receiver and dial
the number
OR
••Without lifting the
receiver press the
NewCall soft key and dial
the number, lifting the
receiver when the call is
answered, or not lifting
the receiver to use hands
free (speaker).
OR
••Without lifting the
receiver dial the number
and press the Dial soft
key, speaker phone will
be used for the call.
OR
Press the “"speaker”"
button, dial the digits.
OR
••Press the Redial soft key.
••Press the Hold softkey.
The Line button will flash
amber.
To return to the call,
••Press the Resume softkey.
••Press the “"+”" or “" “" Volume
button when the receiver is
in use.
••Press the Save soft key to
save your change.
••Press the “"+”" or “" “" Volume
Tip
Each user will place a call
in a manner in which is
comfortable and easy for
them. There are several
ways to make a call, the
end user will decide
which way is best for
them.
A call on hold remains
active even though you
and the other party
cannot hear each other.
You can answer or place
another call while a call is
on hold.