Show Ip Dvmrp Interface - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

3-3 show ip dvmrp interface

show ip dvmrp interface [IFNAME]
Syntax Description
IFNAME
Default
Command Mode
Usage Guideline
Example
Switch# show ip dvmrp interface
Interface IP Address
------------ -----------------
System 10.90.90.90
ipif1 90.1.1.1
Total Entries: 2
Switch# show ip dvmrp interface System
Interface IP Address
------------ -----------------
System 10.90.90.90
Field Description
Interface Specify the interface name.
IP Address The IP address of the interface.
Generation ID Specify the generation ID of this interface. This value is dynamically
generated by the switch, and it is used for the neighbor to detect that
whether the switch has restarted or not
Metric The metric value of the interface, which is configured by command "ip
dvmrp metric".
State Specify the DVMRP interface state, which is configured by command "ip
dvmrp"
CLI Reference Guide
Use this command to display DVMRP interface information.
Specify an interface name. If no interface name is specified, the command will
list all interfaces' info.
None
User mode or Privileged mode.
This command is used to display basic DVMRP interface information.
The following example shows all DVMRP interfaces information.
The following example shows information of interface System.
Metric Generation ID
------ -------------
1 1368947491
1 0
Metric Generation ID
------ -------------
1 1368947491
show ip dvmrp interface
State
--------
Enabled
Disabled
State
--------
Enabled
203