Technical Specifications - Cisco 4G-LTE-ANTM-O-3 Installation Manual

Dual lte-single gps multi-band antenna
Table of Contents

Advertisement

Technical Specifications

Table 1
.
Table 1
Operating Frequencies
Polarization
Nominal Impedance
Gain
Maximum Power
VSWR
Elevation Plane (3 dB Beamwidth)
Azimuth Plane (3 dB Beamwidth)
Connector type
Cable
Height
Base Diameter
Color
Flammability
Environment
Mounting
Operating and storage temperature
Ingress Protection
1. Total gain, free space test when mounted on a 1-foot diameter ground plane with unused ports loaded.
2. Free space Voltage Standing Wave Ratio (VSWR) over all operating frequency ranges when mounted on a 1-foot
3. When mounted per installation instructions.
OL-32387-01
lists the specifications for the RF antenna.
Specifications of RF antenna
1
(Typical)
2
3
diameter ground plane with unused ports loaded.
698-960 MHz
1710-2700 MHz
Vertical, linear
50 Ohms
2.5 dBi
3 Watts
< 2.5:1
30° (nominal)
Omni-directional
SMA-Male
4 ft RG174 VW-1 compliant
90 mm
137 mm
White, Black, Red or Blue
UL-94 V0
Indoor and outdoor
5/8 inch lug with serrated face nut, optional
adhesive backing (peel-off), 17 sq. inches area
(minimum) on a flat smooth surface, 5/8 inch
diameter hole through mounting surface
-40 to +85 degree C
IP67
Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide
Overview of the 4G-LTE-ANTM-O-3 Antenna
3

Advertisement

Table of Contents
loading

Table of Contents