Antenna Options By Deployment Type; Safety Precautions - Cisco 4G-LTE-ANTM-O-3 Installation Manual

Antenna Options by Deployment Type

Table 5
Table 5
Deployment Type
Indoor
Indoor, with extension
Outdoor flush

Safety Precautions

This section contains the following warning statements. A warning means danger. You are in a situation
that could cause bodily injury. Before working on an equipment, be aware of the hazards involved with
electrical circuitry and standard safety practices to prevent accidents.
Statement 1052—Installing and Grounding the Antenna
Do not locate the outdoor antenna near overhead power lines or other electric light or power circuits,
Warning
or where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, as they may cause serious injury or death. For proper
installation and grounding of the antenna, refer to national and local codes (for example, U.S.:NFPA
70, National Electrical Code, Article 810, Canada:Canadian Electrical Code, Section 54).
Statement 1024—Ground Conductor
Warning This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available.
OL-32387-01
lists the antenna options by deployment type.
Antenna Options by Deployment Type
Description
The antenna is installed indoors on a
grounded metal surface and
attached directly to a router.
The antenna is installed on a
grounded metal surface and
attached to a router with extension
cables.
The antenna is installed outdoors to
a grounded metal surface and
attached directly to a router
mounted indoors.
Cisco Dual LTE-Single GPS Multi-band Antenna Installation Guide
Antenna Options by Deployment Type
Antenna Accessories
Required
None
4G-CAB-LMR240-25
•
4G-CAB-LMR240-50
•
4G-CAB-LMR240-75
•
4G-CAB-ULL-20
•
4G-CAB-ULL-50
•
None
13