Table of Contents
Advertisement
MAN-MAXPRO
REV. B.0.
•
7.6
The Download function allows you to transfer data from the
instrument to the computer.
•
•
•
•
•
7. DATA LOGGING
In this dialog box, select the appropriate COM port and time
zone. The COM ports that exist and are available appear as
possible selections. Make sure your port selection agrees
with the COM port on your computer that the download
cable is connected to. Click on OK to return to the Main
Screen (See Figure 7).
DOWNLOADING INFORMATION FROM
THE MICROMAX PRO
Follow procedures indicated in Section 7.5 Starting the
Program.
Turn on the instrument and allow it to go into normal
operating mode.
Click on the Communication menu, then on Download, or
simply click on the Download button on the toolbar of the
Main Screen. The Download Data/Instrument Parameters
dialog box appears.
In this dialog box, select Data (for downloading instrument
parameters, logged gas readings, and calibration data) or
Instrument Parameters (for downloading instrument
parameters), and click on OK. The following will appear on
the screen: "Is the cable connected and the instrument
ready?"
Choosing the download instrument parameters option
dumps all logged data in the instrument and the data is not
saved in the program.
Connect the instrument interface end of the download
cable to the port of the instrument.
WARNING
43
Advertisement
Table of Contents
