Yamaha TSX-10 Owner's Manual page 15

This chapter explains the basic operations common to
tuning, playing CDs and other connected components.
STANDBY/ON
VOLUME
PHONES INPUT
STANDBY/ON
LEVEL -/+
INPUT
MUTE
VOLUME +/-
1
2
3
4
Turn on the power by pressing STANDBY/ON.
Select the desired input source by pressing INPUT
l
repeatedly until the source appears on the display.
l
When you operate the component connected to the
LINE IN terminal, select AUX.
I
Play the source. (Refer to the instructions of each
selected component.)
Adjust the volume level by turning VOLUME on the
main unit or pressing VOLUME +/- on the remote
control.
n Sound controls
You can perform various sound controls using the remote
control. These controls and VOLUME adjustment have no
effect on the material being recorded with the component
connected to the LINE OUT terminal.
MUTE:
You can mute the sound.
Press MUTE.
l
"Mute" appears on the display.
Pressing the button again cancels this feature.
BASS/TREBLE:
You can adjust the level of low frequency response
(BASS) and high frequency response (TREBLE).
1 ; BASS/TREE eatedly until "BASS
_' OdB" or "TREBL + OdB" appears on the
display.
2 Press LEVEL -/+ to adjust the level.
The value increases or decreases in steps of n '_
Control range: -1OdB to +lOdB (Preset valu +OdB)
B. BOOST (Bass boost):
You can reinforce the bass frequency response.
Press B.BOOST.
l
The "B.BOOST" indicator lights up on the display.
Pressing the button again cancels this feature.
H When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the speakers through
+bP headphones.
n
When you have finished using this
unit
Press STANDBY/ON to set this unit to the standby mode.
l
The brightness of the display decreases.
13
LISTENING TO A SOURCE
This chapter explains the basic operations common to
tuning, playing CDs and other connected components.
STANDBY/ON
PHONES
B. BOOST
BASS/
TREBLE
MUTE
VOLUME
INPUT
STANDBY/ON
LEVEL
-/+
INPUT
VOLUME
+/-
1
Turn on the power by pressing STANDBY/ON.
2
Select the desired input source by pressing INPUT
repeatedly until the source appears on the display.
• When you operate the component connected to the
LINE IN terminal, select AUX.
3
Play the source. (Refer to the instructions of each
selected component.)
4
Adjust the volume level by turning VOLUME on the
main unit or pressing VOLUME
+/- on the remote
r;ontrol.
• Sound controls
You can perform various sound controls using the remote
control. These controls and VOLUME adjustment have no
effect on the material being recorded with the component
connected to the LINE OUT terminal.
MUTE:
You can mute the sound.
Press MUTE.
• "Mute" appears on the display.
Pressing the button again cancels this feature.
BASSITREBLE:
You can adjust the level of low frequency response
(BASS) and high frequency response (TREBLE).
1 ; BASSITREE eatedly until "BASS
± OdB" or "TREBl ± OdB" appears on the
display.
2
Press LEVEL
-/+ to adjust the level.
The value increases or decreases in steps of ~
Control range: -lOdB to +lOdB (Preset valu ±OdB)
B. BOOST (Bass boost):
You can reinforce the bass frequency response.
Press B.BOOST.
• The "B.BOOST" indicator lights up on the display.
Pressing the button again cancels this feature.
• When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the speakers through
thp hpadphones.
• When you have finished using this
unit
Press STANDBY/ON to set this unit to the standby mode.
• The brightness of the display decreases.
13
LISTENING TO A SOURCE
This chapter explains the basic operations common to
tuning, playing CDs and other connected components.
STANDBY/ON
PHONES
B. BOOST
BASS/
TREBLE
MUTE
VOLUME
INPUT
STANDBY/ON
LEVEL
-/+
INPUT
VOLUME
+/-
1
Turn on the power by pressing STANDBY/ON.
2
Select the desired input source by pressing INPUT
repeatedly until the source appears on the display.
• When you operate the component connected to the
LINE IN terminal, select AUX.
3
Play the source. (Refer to the instructions of each
selected component.)
4
Adjust the volume level by turning VOLUME on the
main unit or pressing VOLUME
+/- on the remote
r;ontrol.
• Sound controls
You can perform various sound controls using the remote
control. These controls and VOLUME adjustment have no
effect on the material being recorded with the component
connected to the LINE OUT terminal.
MUTE:
You can mute the sound.
Press MUTE.
• "Mute" appears on the display.
Pressing the button again cancels this feature.
BASSITREBLE:
You can adjust the level of low frequency response
(BASS) and high frequency response (TREBLE).
1 ; BASSITREE eatedly until "BASS
± OdB" or "TREBl ± OdB" appears on the
display.
2
Press LEVEL
-/+ to adjust the level.
The value increases or decreases in steps of ~
Control range: -lOdB to +lOdB (Preset valu ±OdB)
B. BOOST (Bass boost):
You can reinforce the bass frequency response.
Press B.BOOST.
• The "B.BOOST" indicator lights up on the display.
Pressing the button again cancels this feature.
• When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the speakers through
thp hpadphones.
• When you have finished using this
unit
Press STANDBY/ON to set this unit to the standby mode.
• The brightness of the display decreases.
13