Multi-function Display
SET Button
The SET button is used to set the digital
clock
(page
32).
The SET button is also used to reset (zero)
the tripmeter and time meter. To reset the
tripmeter and time meter, press and hold the
button for about 2 seconds.
MODE Button
The MODE button is used to set the digital
clock
(page
32).
The MODE button is also used to switch
between 5 displays (digital clock, tachometer,
time meter, tripmeter and hourmeter). To
switch from one display to another, push the
button.
26
Instruments & Controls
The MODE button is also used to select the
limit mode. To select the limit mode, press
and hold the button for at least 5 seconds with
the engine off
(page
39).
digital clock
tachometer
time meter
tripmeter
hourmeter