Honda AQUATRAX R-12X 2005 Owner's Manual page 166

Bilge Drain System
3. Clean the bilge strainer in fresh water.
4. Check for clogging by spraying water from
the bilge strainer side. Water should flow
out of the bilge drain nozzle in the jet
pump.
If the bilge strainer or other parts of the
bilge drain system are clogged or damaged,
replace as necessary. See your Honda PWC
dealer.
5. Remove the bilge drain plugs to drain the
engine compartment
158
Servicing Your Honda
(page 47).
6. Inspect the plugs for cracks or damage.
Replace if necessary. Tighten the plugs
securely.
7. Install the bilge strainer.
8. Install the rear tray, rear cover and seat.