NEC Electra Elite IPK II User Manual page 18

To erase a previously recorded VRS message:
1. Press Speaker key.
2. Dial 616.
3. Dial 3 (Erase).
4. Dial the number of the VRS message you want to erase (01~48).
5. Press HOLD to cancel the procedure without erasing (and return to
step 3).
Hang up to erase the message.
To record, listen to or erase a VRS message if you call in using DISA:
1. Place call to the system.
2. After the system answers, dial the DISA password (normally
000000).
3. Dial 616 and the VRS password.
4. Dial the function you want.
7 = Record
5 = Listen
3 = Erase
5. Dial the message number (01~48), record the message and press
# to end recording.
Note:
Note:
- OR -
If you dialed 7 to record, you can dial # to listen to the message
you just recorded.
If you dialed 5 to listen, you can dial 5 and the message
number to hear it again or if you want to Record, listen to or
erase another message, go back to step 4.
12