Cisco 7941 Quick Start Manual page 7

Making a call while a call is in progress
If you are in the middle of a call and want to talk to another party briefly while still being connected to your
original second party, then you can use the same line to dial out an additional call. You can make up to
six calls on each line you have available.
Step 1) Press the line button corresponding to your primary line (should be the topmost line button
next to your LCD panel). Note that your original call will still be displayed on the LCD panel.
Step 2) Press the NewCall soft key.
Step 3) Dial the number of the additional party.
Step 4) You should now be connected to your third party. Your second party will be placed on hold
while you interact with the third party. You can reconnect to your second party by using the
SCROLL buttons and the Resume soft key.
Notes: Only one call can be "active" at any given time. All other calls are automatically placed on hold.
To instantly create a conference call between three or more parties (yourself included), press the
more soft key followed by the Join soft key. This will automatically create a conference with all
the parties that are connected (see the Conference Call section for more details).
MISSOURI S&T Information Technology Quick Start Guide: Cisco 7941/7961 IP Telephone – 7