Cisco 7965G Manual page 70

If you want to...
Add a new PAB entry
Assign a Fast Dial
code to a PAB entry
Add a new Fast Dial
code (not using a PAB
entry)
Search for Fast Dial
codes
Place a call using a
Fast Dial code
Delete a Fast Dial
code
Log out of Personal
Directory
Tips
• Your system administrator can provide you the user ID and PIN that you need to log in to Personal
Directory.
62
Then...
1. Access Personal Directory, then choose Personal Address Book.
2. Access the Search page by choosing Submit. (You do not need to input
search information first.)
3. Press New.
4. Use your phone keypad to enter a name and email information.
5. Choose Phones and use the keypad to enter phone numbers. Be sure to
include any necessary access codes such as a 9 or 1.
6. Choose Submit to add the entry to the database.
1. Search for a PAB entry.
2. Highlight the listing and press Select.
3. Press Fast Dial.
4. Highlight the number that you want to dial and press Select.
5. Highlight any unassigned Fast Dial code that you want to assign to the
number and press Select.
1. Choose > Personal Directory > Personal Fast Dials.
2. Highlight a Fast Dial code that is unassigned and press Assign.
3. Enter a phone number.
4. Press Update.
1. Choose > Personal Directory > Personal Fast Dials.
2. Choose Next to move through listings.
1. Search for a Fast Dial code.
2. Press Dial.
1. Search for a Fast Dial code.
2. Highlight the listing you want and press Remove.
3. Press Remove again.
1. Choose > Personal Directory (exact name can vary).
2. Choose Log out.
3. Press OK.
OL-19612-01