Ending A Call - Cisco 7965G Manual

If you want to...
Answer a priority call
(SCCP phones only)
Answer a call on your
mobile phone or other
remote destination
Tip
If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.

Ending a Call

To end a call, hang up. Here are some more details.
If you want to...
Hang up while using the handset
Hang up while using a wired headset
Hang up while using the speakerphone Press
Hang up one call, but preserve another
call on the same line
Cisco Unified IP Phone 7965G and 7945G Phone Guide for Cisco Unified Communications Manager 7.1(2)
Then...
Hang up the current call and press
Answer.
Set up Mobile Connect and answer your
phone.
When you enable Mobile Connect:
• Your desktop and remote
destinations receive calls
simultaneously.
• When you answer the call on your
desktop phone, the remote
destinations stop ringing, are
disconnected, and display a missed
call message.
• When you answer the call on one
remote destination, the other remote
destinations stop ringing, are
disconnected, and a missed call
message is shown on the other
remote destinations.
Then...
Return the handset to its cradle. Or press EndCall.
Press
If you are using a wireless headset, refer to the wireless
headset documentation.
Press EndCall. If necessary, remove the call from hold first.
For more information, see...
Prioritizing Critical Calls,
page 49
Using Cisco Extension
Mobility, page 50
. Or, to keep headset mode active, press EndCall.
or EndCall.
25