Control Panel - AEG SCT81900S0 User Manual

1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refriger-

2. CONTROL PANEL

1 2
Fridge Pilot light
1
Fridge ON/OFF switch
2
Fridge temperature regulator, + but-
3
ton
Fridge temperature indicator
4
Fridge temperature regulator, - but-
5
ton
DYNAMICAIR indicator
6
DYNAMICAIR button
7
Appliance Pilot light
8
Appliance ON/OFF switch
9
Freezer temperature regulator, +
10
button
Freezer temperature indicator
11
Freezer temperature regulator, -
12
button
FROSTMATIC indicator
13
FROSTMATIC button
14
Alarm indicator
15
Alarm reset button
16
3 4 5 6 7 8 9 10
2.1 Switching on
1.
Insert the plug into the mains sock-
et.
2. Press ON/OFF switch .
3. The Pilot Light will light up.
4. The alarm indicator light flashes
since the temperature is reached.
The acoustic alarm sounds.
5. Press the alarm reset button to reset
the alarm.
2.2 Switching off the fridge
1. Keep ON/OFF switch pressed for
more than 5 seconds.
2. A countdown on the temperature in-
dicator, from -3 -2 -1 will be shown.
When "1" appears the fridge is
turned off. The temperature indica-
tor switches off. The Pilot light
switches off.
ENGLISH
ant circuit or insulation materials.
The appliance shall not be dis-
carded together with the urban
refuse and rubbish. The insula-
tion foam contains flammable
gases: the appliance shall be dis-
posed according to the applica-
ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-
changer. The materials used on
this appliance marked by the
symbol are recyclable.
11 12 13 14 15 16
5