Installation Overview; Checking Before Installation - Sony HDC-900 Installation And Maintenance Manual

1-1. Checking before Installation

1-1-1. Checking the ROM and Software Version
When connecting the peripheral equipment in the list below to HDC-900/910/950/
930, be sure to check that the ROM and software version on each peripheral device
is corresponding to the camera to be connected.
When the HKC-T950 is used by connecting into the HDC-950/930, be sure to check
the version of ROM of HDC-950/930.
If the ROM and software version is lower than the specified below, be sure to
perform ROM replacement and updating the software.
If ROM replacement and updating the software are required, contact your local Sony
Sales Office/Service Center.
ROM
Peripheral equipment Board name
MSU-700A/750 CPU-293/CPU-286
CNU-700 AT-89 or AT-89A
CNU-500 AT-100
RCP-720/721 MPU-79
RCP-730/731 MPU-79
RCP-740/741 MPU-79
RCP-700/701 MPU-92
RM-B150 CPU-266
HDC-950 AT-130
HDC-930 AT-130
HDCU-900 AT-141
HDCU-950 AT-149
Software
Peripheral equipment Board name
RCP-750/751 MPU-123
RM-B750 MPU-124
1-1-2. Setting the Format of HDCU (HDC-910/930)
When setting the format of HDCU-900/950 in the system using the HDC-910/930,
be sure to select the format corresponding to the HDC-910/930.
HDC-900/950 IMM
Section 1

Installation Overview

Ref No. Rom version
IC5, IC6/IC5, IC6 Ver. 1.10 or higher
IC4, IC5 Ver. 3.20 or higher
IC4, IC5 Ver. 2.80 or higher
IC10 Ver. 2.73 or higher
IC10 Ver. 2.73 or higher
IC10 Ver. 2.73 or higher
IC6 Ver. 2.73 or higher
IC4 Ver. 1.00 or higher
IC1 Ver. 1.20 or higher
IC1 Ver. 1.21 or higher
IC105, IC106 Ver. 1.21 or higher
IC206 Ver. 1.00 or higher
Software version
Ver. 1.01 or higher
Ver. 1.00 or higher
1-1 (E)