Replacing The Fuse - Sony HDC-900 Installation And Maintenance Manual

2-3. Replacing the Fuse

2-3. Replacing the Fuse
w
The fuse is critical for safely operating. Do exchange with
the fuses authorized by the manufacturer, otherwise a fire
and electric shock may occur.
2-3-1. HDC-900/910
In the power supply portion of the HDC-900/910, fuses for
protecting from the overcurrent are mounted on each
circuit and each block.
When a fuse burns, find out the cause of the overcurrent
and solve it before replacing the fuse.
When replacing, be sure to use the specified fuses below.
Holder's name Description
MAIN FUSE (H.B.C.) 4 A/250 V
LENS FUSE (H.B.C.) 4 A/250 V
VF FUSE (H.B.C.) 6.3 A/250 V
CAMERA FUSE (H.B.C.) 4 A/250 V
OTHERS FUSE (H.B.C.) 2 A/250 V
Replacing
1. Open the side plate. (Refer to Section 1-4.)
2. Remove the fuse holder with a flat blade screwdriver
and replace the fuse.
n
Use care that the fuses to be used differ depending on
the fuse mounting position.
VF
CAMERA
OTHERS
2-4 (E)
2-3-2. HDC-950/930
Fuses for protecting from the overcurrent are mounted in
the HDC-950/930.
When a fuse burns, find out the cause of the overcurrent
and solve it before replacing the fuse.
When replacing, be sure to use the specified fuse below.
Replacing
1. Remove the fuse holder with a flat blade screwdriver
Part No.
! 1-576-231-11
! 1-576-231-11
! 1-576-233-11
! 1-576-231-11
! 1-576-228-11
LENS
MAIN
Fuse
Fuse holder
Description
FUSE GLASS 10 A/125 V
and replace the fuse.
Fuse
Fuse holder
Part No.
! 1-576-048-11
HDC-900/950 IMM