Operator File - Sony HDC-900 Installation And Maintenance Manual

4-2. Operator File

4-2. Operator File
Data is stored in the memory stick using the setup menu. As for the items to be stored, refer to Section 4-
8," File Items".
m
. As for the setup menu, refer to Section 3.
. Operator files stored in the memory stick will not be read when the power is just turned ON. This file
will only be read when READ is executed at the setup menu.
. The current operator file data is retained even when the power is turned off by the power switch.
. Before storing the file in the memory stick, make sure that the LOCK switch on the memory stick is in
OFF position.
Storing the Operator File in the Memory Stick (Refer to step 1 of Fig. 4-2.)
Set the setup menu as follows, and store the current status in the memory stick.
Reading the Operator File from the Memory Stick (Refer to step 2 of Fig. 4-2.)
Set the setup menu as follows.
Memory stick
Reading Storing
(Step 2) (Step 1)
Current Operator
File Data
Output to hardware
4-2 (E)
Camera unit
Preset
reading
(Step 3)
Preset Operator File
Preset
storing
(Step 4)
Fig. 4-2. Operating Procedure for Operator Files
Preset
initialization
(Step 5)
Preset factory-set
value
HDC-900/950 IMM