Get Connected - NETGEAR 341U Get Started

Get Connected
The first time you insert your NETGEAR 341U USB
Modem into an available USB port, it is designed to
automatically activate and connect to the Sprint
network.
Note: For optimal signal reception indoors, your
device should be as close as possible to an
outside-facing window.
1. Turn on your computer and close all applications.
2. Insert the device's USB connector into an
available USB port on your computer. Your device
should automatically activate and connect to the
Sprint network.
Note: The first time you connect your USB modem,
you will be prompted to install required drivers and
to accept the Terms and Conditions.
3. Launch the device's Web browser interface
to check the connection status. Type
http://sprintmodem or http://192. 1 68. 1 . 1 into
the Web browser. The User Interface will show
Connected when your device has completed
the activation process.
4. In the Sign In field, enter the administrator
password (1 - 31 letters, numbers, and
symbols).
Note: The default password is "password". It's
recommended you change the password.
5. Click Sign In.