Honda Motorcycle User Manual page 88

Tyre Puncture u
6. Remove the brake caliper bracket, rear
wheel and side collars.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
wheel is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
86
Removing Wheels
http://mototh.com
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
2. Make sure that the slot on the brake
caliper bracket is positioned in the lug on
the swingarm.
Brake caliper bracket
Swingarm
Lug
Slot