Cisco 7961G Administration Manual page 104

Device Configuration Menu
Table 4-6 Ethernet Configuration Menu Options
Option Description
Forwarding Indicates whether the internal switch
Delay begins forwarding packets between the
access port and the network port on the
phone when the phone becomes active.
When this option is set to No, the
internal switch begins forwarding
packets immediately. When this option
is set to Yes, the internal switch waits 8
seconds before forwarding packets
between the access port and the
network port.
Set this option to Yes if you connect
both ports to switches for redundant
uplinks or if you daisy chain phones.
Span to PC Port Indicates whether the phone will
forward packets transmitted and
received on the network port to the
access port.
Enable this option if an application that
requires monitoring of the phone's
traffic is being run on the access port.
These applications include monitoring
and recording applications (common in
call center environments) and network
packet capture tools that are used for
diagnostic purposes.
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
4-20
Chapter 4 Configuring Settings on the Cisco IP Phone
To Change
Use Cisco CallManager Administration
to modify.
Use Cisco CallManager Administration
to modify.
OL-6966-01