NETGEAR CWGE111 User Manual page 21

CWGE111 802.11g WiFi Receiver User Manual
5. Configure Automatically
The SSID, Authentication, and Encryption Key values corresponding to the Access Point
are automatically configured to be the same as the respective values that correspond to
the ISP's network.
With the Access Point Configuration set to Configure Automatically, the SSID,
Authentication, and Encryption Key values of the Integrated Wi-Fi Access Point will be
configured to be the same as in the Wireless Settings section.
Note: In the Wireless Settings section, if Authentication is set to either 802.1x
with dynamic WEP key or WPA/WPA2-Enterprise, then the Configure
Automatically option of the Access Point Configuration becomes unavailable,
because the Integrated Wi-Fi Access Point functionality currently does not
support authentication via the 802.1x with dynamic WEP key and
WPA/WPA2-Enterprise methods.
6. Disable.
This option disables the Access Point.
Chapter 2: Advanced Configuration | 21