Cisco 3640 User Manual page 7

Table 1
Country
Australia
Europe
Japan
New Zealand
North America
Verify
To verify the ISDN BRI interface configuration, use the commands demonstrated below. The text
shown in bold displays the results of configuration steps such as those shown in the "Configuration
Tasks" section on page 4.
Step 1
ISDN Switch Types
ISDN Switch Type
basic-ts013
basic-net3
basic-nwnet3
basic-1tr6
basic-vn2
basic-vn3
ntt
basic-nznet3
basic-5ess
basic-dms100
basic-ni
The show running-config command in EXEC mode shows the current configuration
running on the terminal. The example below shows some of the command output that is
relevant to B RI configuration tasks.
The show startup-config shows the configuration stored in NVRAM or in a
Note
location specified by the CONFIG_FILE environment variable.
Building configuration...
Current configuration:
!
version 12.0
no service udp-small-servers
service tcp-small-servers
!
hostname Router
!
enable secret 5 $1$c8xi$tObplXsIS.jDeo43yZgq50
enable password xxx
!
username xxxx password x 11x5xx07
no ip domain-lookup
ip host Labhost 10.17.12.1
ip host Labhost2 10.17.12.2
ip name-server 10.70.169.21
!
interface Ethernet0
Description
Australian TS013 switches
ETSI ISDN switches (UK and others)
Norwegian NET3 ISDN switches (phase 1,
no longer exist, basic-net3 used instead)
National German ISDN switches
National French ISDN switches
National French ISDN switches
Japanese NTT ISDN switches
New Zealand NET3 switches (no longer
exist, basic-net3 used instead)
Custom 5ESS switch
NT DMS-100 switch
National ISDN switches
Modem over ISDN BRI for the Cisco 3640 Router 7
Verify