NETGEAR RangeMax WPN824 Reference Manual page 52

Reference Manual for the RangeMax Wireless Router WPN824
4. Select the Turn Access Control On check box.
5. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup dialog displays.
Figure 4-9
6. In the Available Wireless Cards list, either select from the list of available wireless cards the
WPN824 has found in your area, or enter the MAC address and device name for a device you
plan to use. You can usually find the MAC address printed on the wireless adapter.
Note: You can copy and paste the MAC addresses from the router's Attached Devices
menu into the MAC Address box of this menu. To do this, configure each
wireless computer to obtain a wireless link to the firewall. The computer
should then appear in the Attached Devices menu.
7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes
back to the list screen.
8. Repeat step 5 to step 7
9. Be sure to click Apply to save your Wireless Card Access List settings.
Now, only devices on this list will be allowed to wirelessly connect to the WPN824.
4-16
for each additional device you wish to add to the list.
v1.0, November 2005
Wireless Configuration