NEC Univerge SV8100 Programming Manual page 568

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Input Data
Key
No.
1
2
3
4
5
6
7
8
9
0
#
TIMEOUT
2 - 534
Dial Action Table Number
Dial Action Table Action
TRF Action - Screened
Transfer (1)
(TRF)
UTRF Action -
Unscreened Transfer (2)
(UTRF)
REC1 Action - Quick
Message With Greeting
(3)
(REC1)
REC2 Action - Quick
Message Without
Greeting (4)
(REC2)
LOGON Action - Log
Onto Voice Mail (5)
(LOGON)
Hang Up Action (6)
(HNGUP)
GOTO Action - Go to
Mailbox (7)
(GOTO)
UND Action - Undefined
Routing (0)
(UND)
01~16
Additional Data
Entry : 0-9, #, and
Digits
(8 digits max.)
Use Dial Action Table digits to route an Automated
Attendant call to a specific location (such as an
extension). For example, to set up a TRF Action to route
to extension 305, for 3 enter TRF for the Action and 305
for the corresponding Number.
Caller Dialed Digits Entry : X
(Entered by pressing LK2)
Use the X option to route an Automated Attendant call
based on digits the caller dials. Each X entry represents
one caller-dialed digit. For example, to set up a TRF
Action to route to any caller dialed extension in the
301'399 range, for 3 enter TRF for the Action and XXX
for the corresponding Number.
Entry : I
Ignore Digits
(Entered by pressing LK3)
Use the I option to represent any digit dialed by the
Automated Attendant caller that VM8000 InMail ignores
for routing. An example of this is REC action assigned
to the * key in Dial Action Table 1 by default. The Action
is REC2 and the Number is IXXX. This means that a
caller can dial * + any mailbox number to leave a Quick
Message in that mailbox. VM8000 InMail ignores the
first digit dialed by the caller (*), and routes according to
the next 3 digits dialed.
No Routing Entry : N
(Entered by pressing LK1)
Use the N option when you want no Automated
Attendant routing to automatically occur. This can be
used with the LOGON action when you want to prompt
the caller to enter a mailbox number. To do this for the #
key (for example), for the # key enter LOGON for the
Action and N for the corresponding Number. When the
caller dials #, they hear, Please enter the mailbox
number. Or, to exit, press the pound key."
Entry : P
Pause
(Entered by pressing LK4)
Use the P option when you want the Automated
Attendant to pause while dialing.
UNIVERGE SV8100
Program 47 : InMail