Honeywell TrueCLEAN Professional Installation Manual page 26

Troubleshooting
6. Models FH8000F ONLY: Confirm that power provided from the furnace control EAC terminals is being
conducted through the wiring to the Honeywell Enhanced Air Cleaner power supply.
7. Install the door onto the Honeywell Enhanced Air Cleaner.
8. Turn the power switch to the "ON" position.
9. If all of the above steps are completed and the power indicator light is still not illuminating, replace the
enhancement module. Note that other than the safety screen, there are no serviceable parts on the
enhancement module.
24
TrueCLEAN™ Enhanced Air Cleaner 68-0308EFS—03