Honeywell TrueCLEAN Professional Installation Manual page 24

Maintenance
ENHANCEMENT MODULE
30°
POINTS ARE SHARP! BE VERY CAREFUL DURING CLEANING.
IONIZER POINT WITH RESIDUE IONIZER POINT AFTER CLEANING
M28916A
Fig. 19. Removal of deposits from ionization points.
8. Reinstall the safety screen.
9. Slide the enhancement module back into cabinet.
10. Models FH8000A: Reconnect the power cord and flow sensor cable (see Fig. 11 on page 15).
Models FH8000F: Reconnect the power cord (see Fig. 15 on page 17).
11. Replace the Honeywell Enhanced Air Cleaner door.
12. Turn the Honeywell Enhanced Air Cleaner switch to the on position.
13. Turn heating and cooling system power on.
TrueCLEAN™ Enhanced Air Cleaner 68-0308EFS—03
22