Honeywell TrueCLEAN Professional Installation Manual page 15

Mounting the FH8000F (Furnace) Honeywell Enhanced Air
Cleaner
f. Return air duct adapters have been included for installer convenience. They should be used to connect the
upstream side of the Honeywell Enhanced Air Cleaner cabinet to the return air duct (see Fig. 10).
g. Install foam tape between the furnace and the Honeywell Enhanced Air Cleaner cabinet.
h. Mounting holes are provided for ductwork and furnace attachment.
i. Seal seams with tape or caulking after the Honeywell Enhanced Air Cleaner cabinet has been secured.
Before proceeding to Wiring on page 14:
I mounted and secured the Honeywell Enhanced Air Cleaner cabinet to the duct as instructed.
TrueCLEAN™ Enhanced Air Cleaner 68-0308EFS—03
Fig. 10. Use of Return Duct Adapters.
FH8000F Mounting is complete. Go to page 14.
NOTE:
SLIP S-CLEATS ONTO FLAGES
ON RETURN DUCT SIDE.
M28897
13