Honeywell ST 700 User Manual page 38

Tag ID
Install Date
Firmware
Protocol
Model Key
<Exit Menu>
Page 72
DD MM YYYY
Display
Electronics
Meterbody
HART
DE
ST 700 SmartLine Pressure Transmitters User's Manual
Enter Tag ID name up to 8
characters long.
= any Alphanumeric value
This selection allows the user to
enter the date a transmitter is
installed.
The Install Date is entered in
sequence of Day, Month, and Year,
followed by the new date and the
prompt Write Date to confirm the
entry.
CAUTION: The Install Date can only
be written once in the life of the
Transmitter. You cannot erase or
overwrite the Install Date once it has
been written.
Menu item shows the current
Firmware versions of the Display,
Electronics Module and the Meter
body
Menu item shows the
communications protocol
Identifies the type and range of the
transmitter
Press ↵ to
enter menu
selection
↑ and ↓ to
select
Alphanumeric
↵ to enter
and shift to
next
character to
the right.
Press ↵ to
enter menu
selection
↑ and ↓ to
select
number
↵ to enter
and shift to
next digit to
the right.
Read Only
after entered
Read Only
Parameter
Read Only
Parameter
Revision 1.0