Table of Contents
Advertisement
3 Get started
Charge power
PI3110 has a built-in battery that can be
charged through the USB connector of the
supplied USB power adapter.
The first time you use PI3110, charge PI3110
for more than 5 hours.
•
By using the USB cable, connect
PI3110 to the supplied USB power
adapter.
Note
•
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Conserve battery power
•
To conserve battery power and increase
the play time, do the following:
Use the sleep mode
After the selected time duration, PI3110 goes
to the sleep mode, and the screen switches
off automatically. To save battery power, do the
following:
•
Go to
> Display > Sleep to set the
screen-off timer to a low value.
•
To switch off Wi-Fi during the sleep mode,
a Go to
> Wi-Fi.
b At the top bar, select
> Keep Wi-Fi on during sleep. Select
Never.
Switch the device on or off
Press and hold the power/ lock button until the
device is switched on or off.
> Advanced
EN
7
Advertisement
Table of Contents
