Get Started; Charge Power; Conserve Battery Power; Switch The Device On Or Off - Philips PI3105W2/55 User Manual

Table of Contents

Advertisement

3 Get started

Charge power

PI3105W2/55 has a built-in battery that can
be charged through the USB connector of the
supplied USB power adapter.
The first time you use PI3105W2/55, charge
PI3105W2/55 for more than five hours.
By using the USB cable, connect
PI3105W2/55 to the supplied USB
power adapter.
Note
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.

Conserve battery power

To conserve battery power and increase
the play time, do the following:
Use the sleep mode
After the selected time duration, PI3105W2/55
goes to the sleep mode, and the screen
switches off automatically. To save battery
power, do the following:
> Display > Sleep to set the
Go to
screen-off timer to a low value.
To switch off Wi-Fi during the sleep mode,
a Go to
> Wi-Fi.
b At the top bar, select
> Keep Wi-Fi on during sleep. Select
Never.

Switch the device on or off

Press and hold the power/ lock button until the
device is switched on or off.
> Advanced
EN
7

Advertisement

Table of Contents
loading

Table of Contents