Installing The Software - Sharp AL-2061 Operation Manual

INSTALLING THE SOFTWARE

Using the machine with a USB connection
1
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
2
Insert the CD-ROM into your computer's CD-ROM drive.
3
Click the "start" button, click "My Computer" (
double-click the CD-ROM icon (
• On Windows Vista/7, click the "Start" button, click "Computer", and then
double-click the CD-ROM icon.
• On Windows 2000, double-click "My Computer", and then double-click the
CD-ROM icon.
4
Double-click the "setup" icon (
On Windows Vista/7, if a message screen appears asking you for
confirmation, click "Allow".
5
The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
42
• If you need to use a different connection method after installing the
software using a USB or network connection, you must first uninstall
the software and then install it using the new connection method.
• In the following explanations it is assumed that the mouse is
configured for right hand operation.
• The scanner feature only works when using a USB cable.
• If an error message appears, follow the instructions on the screen to
solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may have to
click the "Cancel" button to exit the installer. In this case, reinstall the
software from the beginning after solving the problem.
• The PC-Fax driver uses the printer driver port. Before installing the
PC-Fax driver, be sure to install the MFP driver (printer/scanner).
The cable will be connected in step 13.
You can show the "SOFTWARE LICENSE" in a different language by
selecting the desired language from the language menu. To install the
software in the selected language, continue the installation with that
language selected.
), and then
).
).