Power On And Off - Sharp AL-2061 Operation Manual

POWER ON AND OFF

The power switch is located on the left side of the machine.
Power on
Turn the power switch to the "ON" position.
You can select copy settings and press the [START] key (
switch is turned on. Copying will start automatically.
Language setting
The first time the power is turned on after shipment from the factory, a message will
appear in English in the display asking you to select the language. Select the
language with the [
The language can also be changed in the user programs (p.138).
10
If you use the machine in a country other than the country
where the machine was purchased, you will need to make sure
that your local power supply is compatible with your model. If
you plug the machine into an incompatible power supply,
irreparable damage to the machine will result.
Only insert the power cord into a properly grounded wall socket.
Do not use extension cords or power strips.
] key ( ) or [
The ready indicator will light up and other
indicators which show the initial settings of the
display will also light up to indicate the ready
condition. For the initial settings, see the
"Initial settings" (see page 15).
] key ( ) and then press the [OK] key.
) after the power