Finding Or Changing Your Network Name (Ssid) And Password (Wpa-Psk) Codes; Setting Up Broadband Backup; How Do I Know When It's Working - Cisco SRP527W User Manual

5. Follow the on-screen instructions to finish setting up the computer.
Follow steps 1-5 listed above for each computer you want to add to the Wi-Fi network.

Finding or changing your network name (SSID) and password (WPA-PSK) codes

1. Starting with a computer that is ALREADY on the Wi-Fi network, insert the Self-Install CD. The self-
install software will begin automatically (if you're using a Mac®, double-click the DOT icon on your
desktop).
2. Follow the on-screen instructions until you get to the SELECT INSTALLATION TYPE screen.
3. On the SELECT INSTALLATION TYPE screen, choose
button. The SELECT EQUIPMENT/SERVICES TO INSTALL
4. On the left side of the
or Disable Wireless (Wi-Fi)
will appear. Your SSID and WPA-PSK codes will be displayed on the screen.
If you want to modify the SSID and/or password, carry out the following steps:
1. Click the Modify button to change your codes.
2. Click the code that you want to change, then type the new code.
3. Click Accept to save your change and then click Next.

Setting up Broadband Backup

Note: Broadband Backup is an optional service (additional charges apply) that can allow you
to continue using the Internet (but not phones, faxes, or EFTPOS) even when your DSL
connection is lost. If you'd like to learn more about Broadband Backup, phone us on 13
2000 and say "Digital Office Technology" when prompted.
Set up your Broadband Backup using the Self-Install CD.

How do I know when it's working?

The Broadband Backup modem has two LEDs: one for power and one for data ( Figure ).
The Power light will always be solid blue when the modem is working and power is supplied.
The Data light will flash blue when you're connected to the Internet using your everyday DSL connection.
If you lose your DSL connection, then the Data light will stop flashing and become solid.
``
SELECT EQUIPMENT/SERVICES TO INSTALL
Network, then click the Next button. The
Figure 6 Broadband Backup modem
Modify existing installation, and then click the Next
screen will appear.
screen, check the box next to
SECURITY INFORMATION
`
Set up
screen
Page 7 of 27