Overview; Abstract; Features - Fujitsu SK-91460T-144PMC-GPIO User Manual

1 Overview

1.1 Abstract

The SK-91460T-144PMC-GPIO is a multifunctional evaluation board for the Fujitsu 32-bit
FR60 Flash microcontroller series MB91460.
It can be used stand-alone for software development and testing or as a simple target board
to work with the emulator system.
The board allows the designer immediately to start software development before his own
final target system is available.

1.2 Features

< Supports Fujitsu's MB91F467TA MCU in FPT-144P-M08 package or the MB2198
Emulator System (ICE 2198-01 + EMA-MB91V460A-002B-80) with the Probe Cables
EMA-MB91F467T-NLS-144M08 or EMA-MB91F467T-LS-144M08.
< 9-15V unregulated external DC power supply
< 5V and 3.3V onboard switching mode voltage regulators
< Power-LEDs for all supply voltages
< Onboard voltage supervisor monitors both supply voltages
< In-Circuit serial Flash programming (UART4)
< All resources available for evaluation
< All MCU pins routed to connectors
< 4 MHz main crystal
< 32 kHz crystal for sub clock operation
< Four RS232- or LIN interfaces and two CAN interfaces are usable simultaneously
< 3V capable CAN, LIN and RS232 transceivers
< 8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs
< Reset button, Reset LED
< 5 User buttons
< 10-turn potentiometer connectable to ADC channel.
This board must only be used for test applications
in an evaluation laboratory environment.
FMEMCU-UG-910074-11
SK-91460T-144PMC-GPIO User Guide
Chapter 1 Overview
- 6 - © Fujitsu Microelectronics Europe GmbH