Getting Started; Introduction To Softune Workbench - Fujitsu SK-91460T-144PMC-GPIO User Manual

Mb91460 series

Table of Contents

5 Getting Started

Make sure that the FR Family Softune Workbench is installed on your PC and the "SK-

91F460T-144PMC-GPIO" is ready to use (power-on, serial connection (UART4, X2) to COM

port of the PC).

Start Softune Workbench. Select <File> <Open Workspace> to load the first example

"91460_template_91467t.wsp". All examples can be found on our webpage at

http://mcu.emea.fujitsu.com/mcu_product/mcu_all_software.htm.

In the project tree on the left side, you can open the "source"-folder which contains the

source-files registered to this project. A double-click on one of the files will invoke the built-in

editor, which supports syntax-highlighting, tags and various other functions.

Note:

You may customize the editor by a right-click on the editor

window.

SK-91460T-144PMC-GPIO User Guide

Chapter 5 Getting Started

Figure 5-1: Softune Workbench main window

- 29 -

FMEMCU-UG-910074-11

Table of Contents