Table of Contents
Advertisement
Available languages
Available languages
Maintenance and Cleaning
CAUTION: Never immerse the unit in water!
• There are no parts inside the device which can be maintained by the user.
• Clean the speaker with a slightly damp cloth without cleaning agent.
Troubleshooting
Symptoms
Cannot switch the
speaker on
No audio signal
during playback
through AUX
No audio signal
during Bluetooth
connection
Cannot connect
speaker
Possible cause
Battery empty
Volume of the external audio
source is too low.
Speaker is switched off
Speaker is not paired to the
audio source.
Audio cable is connected.
Volume too low
Pairing does not work
Audio source is turned off
Bluetooth is turned off on the
audio source.
Bluetooth version is not sup-
ported.
English
Solution
Charging the integrated battery
(
Page 48)
Increase the volume of the
external audio source.
Switch the speaker on.
Check whether the connection
exists. If necessary, pair the
speaker to the audio source
again.
Remove the cable.
Increase the volume on the
audio source.
Check, whether the audio
source supports the A2DP
protocol.
Turn the audio source on
Turn the Bluetooth function on
in the audio source.
Use another playback unit.
53
Advertisement
Table of Contents
