Using The Configuration Menu - D-Link DCS-1130 User Manual

Section 3 - Configuration
After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration
utility is designed to allow you to easily access and configure your DCS-1130. At the end of the wizard, click Go To
Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer
User name admin and the password you created in the Setup Wizard. If you did not create a password, the default
password is blank. After entering your password, click OK.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the
default IP is 192.168.0.20.
D-Link DCS-1130 User Manual

Using the Configuration Menu

. To log in, use the
®
11