Error Codes Service Function Table; To Clear Error Codes Fromthe Control Memory - GE GTUP270EMWW Service Manual

Diagnostics – Error Codes
To clear error codes from
the control memory; rotate
the washer knob to position
4 and press and hold the
start switch. The indicators
will flash during this
process. Release the start
switch after 3 seconds.
Press and hold the start
and fabric softener
switches while rotating the
knob to position 6 to exit
diagnostic mode.
Diagnostic mode will exit
automatically after 15
minutes or a upon a power
reset.
Copyright General Electric 2010