Log Into The Service Processor Using The Network Management Port - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

▼ Log Into the Service Processor Using the
Network Management Port
Note – You must configure the service processor parameters shown in
the Service Processor Network Management Port" on page 41
network management port.
●
Open an SSH session and connect to the service processor by specifying its
network address.
% ssh root@xx.xxx.xx.x
...
Are you sure you want to continue connecting (yes/no)? yes
...
Password: password (nothing displayed)
Waiting for daemons to initialize...
Daemons ready
Integrated Lights Out Manager
Version 2.0.0.0
->
44 SPARC Enterprise T5440 Server Installation and Setup Guide • July 2009
"Configure
before you can use the