Fujitsu SPARC Enterprise T5440 Installation And Setup Manual page 38

Releasing the Slide Rail Lock
FIGURE:
2. Ensure the slide-rail assembly is adjusted to the distance between the front and
rear posts of your cabinet.
Note – Each slide rail is labeled "left" and "right." Ensure you are attaching the slide
rail to the correct side of the cabinet.
3. Use the alignment pins to position the outer rails on the front and rear rack
posts.
4. Install the screws in the front bracket holes.
Use the rack rail spacing bracket to align the slide assemblies as you tighten the
mounting screws.
Note – The rackmount kit includes both metric and standard fasteners. Use the
fasteners appropriate for your cabinet.
5. Ensure each rail is fully recessed into its outer rail.
6. Move to the rear of the rack.
18 SPARC Enterprise T5440 Server Installation and Setup Guide • July 2009