Operation - Makita LM2350 Instruction Manual

1
2
• Using the waist hook for power cord helps prevent
careless severing of the extension cord due to the cord
being loose.
• Hook the hook section of the waist hook for power cord
into clothing or belt at waist height.
1
2
• To use the Waist Hook for Power Cord, place the
holder in your hand, and hook the hooked section (A
section) into clothing or belt at waist height, and then
clip the power cord into the holder with one touch.
• Be sure to clip in and clip out the power cord from the
mouth of the holder.
NOTE:
• Do not apply excessive strength to the mouth of the
holder. Doing so may cause misshaping or damage to
the holder.

OPERATION

Mowing
WARNING:
Before mowing, clear away sticks and stones from
mowing area. Furthermore, clear away any weeds
from mowing area in advance.
NOTE:
• If the blades catch on small objects like stones, they
may cause blade chipping.
1. A section
2. Holder
1. Holder
2. Power cord
• Firmly hold the electric lawn mower handle with both
hands when mowing.
• The mowing speed guideline is approximately one
meter per four seconds.
• Start mowing from a point near to the power socket to
ensure that the power cord does not become an
obstacle.
1
2
• Do not let the extension cord pass under or become
entangled beneath the main unit of the device.
1
3
2
• The mowing width labels on either side of the front end
of the main unit provide a guideline to mowing width.
Using the width labels as a guideline, mow in strips,
overlapping by one half to one third the previous strip,
to mow the lawn evenly.
• Change the mowing angle (direction) to prevent the
grass grain pattern from forming in just one direction.
As the figure shows, changing the mowing angle
(direction) each time the electric lawn mower is passed
over the lawn will give a beautiful finish to the lawn.
1. Power socket
2. Power cord
1. Mowing width
labels
2. One half to one
third
3. Mowing width
7